Adventures In Audio
Nearfield monitors. Should they be mounted vertically or horizontally?

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Adventures In Audio.

Monday September 11, 2006
FREE EBOOK DOWNLOAD ►

The one advantage of mounting nearfield monitors horizontally is that they are a little lower than when mounted vertically and do not obscure the main monitors, if you have them.

Even if the nearfields are not directly blocking the sound from the main monitors, they still cause refection and diffraction effects, and the lower they are, from this point of view, the better.

However, many small studios don't have main monitors, so all of this is irrelevant. From the point of view of optimum sound quality from the nearfields, it is better to mount the monitors vertically so that the tweeters are directly above the woofers.

The reason for this is that when two loudspeaker drive units emit the same signal, as the tweeter and woofer do close to the crossover frequency, and that signal arrives at the ear via different path lengths, then there will be interference effects and some frequencies will be canceled out.

If the speakers are mounted horizontally, there is only one position between the speakers, even with precise orientation, where the engineer is equidistant from all four drive units of the stereo pair.

Better lock your head into a vice so that you stay there!

With vertical mounting then, at least for each individual speaker, both drive units are always the same distance away.

The trick now is not to slouch in your seat, because 'equal distance' only works at one height.

This is a real and audible effect. You should try moving around horizontally and vertically in front of your speakers. You will hear significant changes in tonal quality.

The only complete solution is to use dual concentric speakers such as some of the Tannoy range, where the tweeter is mounted actually WITHIN the woofer. With this type of loudspeaker, you have far greater freedom of movement as you work.

Come on the Audio Masterclass Pro Home Studio MiniCourse - 60 great hints and tips to get your home recording studio MOVING

It's FREE!

Get It Now >>

How to choose the best key for your song

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue

Clipping and compressing a drum recording to achieve an exciting sound texture

What can we learn about room acoustics from this image?

Can you hear the subtle effect of the knee control of the compressor? (With audio and video demonstrations)

What is the best studio microphone?

What is the Neve sound? (Using the Slate Digital FG-73)

What is the difference between recording, mixing and mastering?