Adventures In Audio

How important is it that your monitor loudspeakers are at the right height?

by David Mellor

If your studio monitor loudspeakers are too low then their position will affect what you hear, leading to problems in your finished work. They might be bad for your posture too, which is a potential problem that should not be ignored.

If your studio monitor loudspeakers are too low then their position will affect what you hear, leading to problems in your finished work. They might be bad for your posture too, which is a potential problem that should not be ignored.

This could possibly be a publicity photo and not a real working studio. It's part of a press release from Focusrite advertising a three-year warranty (which is of course very welcome and we're pleased to hear of it). But it can tell us interesting things about loudspeaker positioning and general studio convenience.

The main issue, if this were a working studio, is that the monitor loudspeakers are too low. You can see under the right monitor that there are books or notepads that raise it a little, but nowhere near enough. I would presume that the left monitor is raised similarly.

Audio Masterclass Video Courses

Learn FAST With Audio Masterclass Video Courses

With more than 900 courses on all topics audio, including almost every DAW on the market, these courses are your fast track to audio mastery.
Get a library pass for all 900+ courses for just $25.

Speakers generally give their best performance at 90 degrees from halfway between the woofer and the tweeter. There may be some tilt due to the drive units not being precisely time-aligned, but sitting with your ears on a level halfway between the drive units looking square-on at the cabinet is the best place to start, then find the sweetest spot by moving your head around while listening attentively.


So what are the consequences of having the monitors too low?

Well firstly because you're not getting the best sound from your speakers, you will automatically compensate for that in your mix settings, mostly in the EQ. You'll hear the benefit, but to your listeners outside of your studio what they will hear is your over-correction for something that wasn't actually wrong in the first place.

Secondly, I find that if the speakers are too low I will automatically and without thinking adjust my posture to get a better sound. And although I can't speak with any medical authority I certainly can speak from personal experience that the hunched posture that results causes discomfort leading to pain over time. Of course, hunching over a laptop isn't really a good thing either.

So what's the solution?

Simple - raise the speakers up. It puzzles me why adjustable desktop speaker stands are not more of a thing than they are. But if you look hard enough, you'll find a reasonable selection on the market.

A workable alternative is to tilt the speakers so they point up towards the plane of your ears. I wouldn't say that's quite as good, but it's definitely better than nothing.

Anything else?

Focusrite headphone cord

The Audio Masterclass Pro Home Studio MiniCourse


Great home recording starts with a great plan. The Audio Masterclass Pro Home Studio MiniCourse will clear your mind and set you on the right path to success, in just five minutes or less.

While I'm looking at this alternative crop of the picture, I might also comment that the cord on the headphones attaches to the left earpiece. This means that with the audio interface placed on the right, the cable drapes over the user's lap. Swap the interface over to the left and there's less of a tangle.

One more point might be that placing ornaments on your monitors (as in the main image) is an option, as long as you are absolutely sure that they're not going to rattle. And perfectionists would say that placing an ornament on one speaker is subtly but definitely going to unbalance the sound.

These 'anything else' points are of course small, but any small improvements you can make to your working process will lead to improvements in your finished work.

But get those speakers raised up first - that's what's really going to make the most difference.

Oh by the way - We've heard great work from Audio Masterclass students using Focusrite equipment.

Wednesday February 19, 2020

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

David Mellor

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Adventures In Audio.

More from Adventures In Audio...

An interesting microphone setup for violinist Nigel Kennedy

Are you compressing too much? Here's how to tell...

If setting the gain correctly is so important, why don't mic preamplifiers have meters?

The Internet goes analogue!

How to choose an audio interface

Audio left-right test. Does it matter?

Electric guitar - compress before the amp, or after?

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue