Adventures In Audio with Audio Masterclass
Recording SoftWare for Blind people. Can anybody Please help?

Hands on – Akai S1000 digital sampler (part 4)

FREE EBOOK DOWNLOAD ►

Trimming and looping

The trim function is reached by pressing the ED.1 (Edit 1) soft key. Figure
2 is what you will see. The graphic editing helps enormously in finding the
correct start and end points. Just move the cursor to the Start and End fields
and twist the data knob as necessary. You can zoom in or zoom out on the display
to see the waveform better, but be aware that you can only see the beginning
or the end of the sample, using the double arrow soft key. When you're done,
press the CUT soft key to get rid of the trimmings and release memory for further
use. By the way, if you have been sampling in stereo then you will have noticed
that it's just as easy as working on mono, and when you trim, although you can
only view one side of the stereo at a time, both channels will be trimmed identically.

Trimming is very easy but looping, as with any sampler, is a pig. To be quite
honest, I used to find crossfade looping easier with my old S900 than it is
with the S1000. I found a combination of settings that worked almost always,
but I haven't yet been able to find the equivalent for the more recent model.
Press the LOOP soft key and let's go. Figure 3 shows the Loop page. This time
the waveform display is split into two with a
graphic on the right showing how well, or otherwise, the loops joins up. The
aim is to get the two halves at the same level with the same slope for an undetectable
loop, if you're feeling lucky! Here, you can move the end point of the loop
(the 'at:' field), and its length ('lgth:'). Notice that by positioning the
cursor carefully you can change the values in units, tens, hundreds and thousands
etc, whatever is most convenient. Once again, there's a silly feature on this
page: you have to set the time in milliseconds you wish the loop to sustain
for. I don't know of any application that anything less than forever, or at
least until you release the key, will do. Just dial in a value of over 9999
milliseconds every time you want to loop a sample and try to be patient with
a company which has got almost everything else right. You will notice that there
is a FIND soft key, and this is an enormous help in finding a loop point. It
doesn't work on both channels of a stereo sample by the way. Stereo looping
is possible, by accurately transferring loop values to the other channel manually,
but it's difficult and time consuming to find an adequate stereo loop. Crossfading,
unfortunately, is permanent and changes the sample data in memory. I find that
most of the time the result isn't good enough, so it's essential to have a back
up on disk. I wish it could be retrieved more easily though.

One of the best points of the S1000 is that you can play the sample and adjust
the loop points while listening to the results. With simple waveforms that don't
need a crossfade loop you'll set the loop points in no time at all with the
help of this feature.

David Mellor

Mastering In The Box

Mastering In The Box

Trainer Joe Albano is back with an advanced look at mastering in our popular Audio Concepts series. See how pro audio engineers master their tracks “in-the-box” in this in-depth, high-level audio engineering course.

Learn more...

Add comment








David Mellor